WhisperKool 4000i Owner's Manual download pdf (Page 18)

SC 033114

Page 16 | 1-800-343-9463

LIQUID TEMPERATURE-MEASURING THERMOSTAT

The WhisperKOOL Series cooling units come equipped with a liquid temperature-measuring thermostat. This system

incorporates the following advantages:

Self-Calibrating Bottle Probe

The bottle probe contains a sensor chip, which communicates back and forth with the thermostat. This results in a

consistent temperature setting and accuracy.

1. Wine temperature is kept in a very precise, controlled environment. This assures a consistent temperature.

2. By measuring the liquid temperature rather than air, the unit will operate 75–80% of the time.

Liquid Temperature Measuring Thermostat

To assure a consistent temperature, place bottle probe approximately 3 feet away from the air output and not in the flow of the air.

To Use the Thermostat:

1. Locate an empty wine bottle.

2. Fill ¾ full with room temperature tap water.

3. Place bottle probe securely into bottle making

4. Place bottle with probe level and to the side of the unit in your wine cellar.

It is recommended that the bottle be placed in a central location of your wine

cellar. Avoid pulling too much on the probe cord. It may become disconnected

resulting in non-operation of the unit.

Note: The thermostat can be set between 50°F and 70°F.

Remember: The WhisperKOOL Unit is based on the temperature of the water. Do

not be misled by thermostats reading air temperature. The air temperature in the

cellar will be cooler than the liquid temperature of the wine while it is reaching

optimum balanced temperature.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

WhisperKool 4000i Owner's Manual Page 18