WhisperKool 4000i Specifications download pdf (Page 26)

PS 102513

Page 24 | 1-800-343-9463

ACTIVE HUMIDITY OPTION OVERVIEW

Use of the Active Humidity Option

Humidity may uctuate in the wine cellar. The Active Humidity Option stabilizes the environment by adding moisture when the

wine cellar is becoming dry. Using a humidistat and a water source, the Active Humidity Option is able to regulate and establish a

humid environment suitable for wine storage.

Note: The ideal humidity of a wine cellar is between 50-70%.

Accessory Included with Active Humidity Option:

(1) 25 ft. Humidistat Cable

(1) Dayton Humidistat

General Active Humidity Option Recommendations

• Water source needs to have at least 40 psi.

• Water tubbing size: 1/4” O.D

• Water source should be tested for content and characteristics.

• In areas that are known to have hard water, the use of a Water-Softener System is required.

Note: Failure to install a Water-Softener or a Filtration system will allow an

excessive particle residue buildup and may lead to system failure.

• Even if the area is not known to have hard water, the use of a Filtration System (Particle Filter) is required.

• Clean the evaporator coil every 3 months to remove particle residue buildup.

• It might be best to use a Self-Piercing Saddle Valve as a simple connection to a water source.

• Clean or replace the Misting Nozzle every 12 months.

Water Flow Order

• The water supply should pass through either

a Water-Softener or a Filtration system before

reaching the unit as shown in Figure 2.

• Route a 1/4” Copper, Pex or equivalent tubing from

the water source and connect to the water inlet

tting on the unit as shown in Figure 3.

• Turn on the water and check for leaks.

Self-Piercing Saddle Valve

Install a Self-Piercing Saddle Valve to a near by water supply for

simple connection to a water source as shown in Figure 1.

Do not allow water leakage inside of the Unit.

TUBING OUTLET

OPTIONAL INSERT FOR

PLASTIC TUBING

WATER SUPPLY

Figure 2

Figure 3

Figure 1

FILTRATION SYSTEM

COOLING UNIT

MISTING NOZZLE

ACTIVE HUMIDITY SPECIFICATIONS

Power Consumption 0.2 amps @ 120V/60 Hz

dBA TBD

Humidistat Range 30-90% RH

Humidistat Accuracy ± 1%

Humidistat Adjustment

Increments

Water Supply Feed Rate 0.63 gph @ 40 psi

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

WhisperKool 4000i Specifications Page 26

Comments to this Manuals

Related products and manuals for Split-system air conditioners WhisperKool 4000i