WhisperKool 4000i Specifications download pdf (Page 38)

PS 102513

Page 36 | 1-800-343-9463

CONTROLLER FUNCTIONS

If your unit has a remote keypad then you will have the Remote Controller.

Button Normal Functions

ON/OFF • The ON/OFF button allows the customer the convenience of turning the refrigeration

system ON or OFF, from the control panel. This feature does not disconnect power from

the unit. In order for the power to be shut o from the unit, the power cord must be

unplugged from the wall receptacle.

• Press the ON/OFF button once for button application.

Up and Down

Arrows

• Use these buttons to scroll up or down the CPSM (Customer Preference Selection Mode)

menu.

• Displays the Highest and Lowest temperature sensed by the Bottle Probe. This feature

allows the customer instant access to the recorded data applicable to the Bottle Probe

Temperatures, it can be easily reset to reect current temperatures.

1. Press the “UP” arrow, or the “Down” arrow once, and the Highest or Lowest Temperature

(Hi/Lo) sensed by the Bottle Probe, will be displayed.

2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed on

the Digital Display. Continue to hold the “Set” button until “rst” appears on the digital

display and then blinks. This will erase the past recorded “Temperature Data History” and

start recording, from the current time and temperature, forward. Temperatures displayed

would reect Bottle Probe Temperatures from that point in time, and beyond.

3. The Hi/Lo feature should be reset at initial “Start-Up” and after the Cellar or Cabinet has

obtained normal operating temperatures, which is generally 55°F.

Cellar PreChill (CPC) The CPC Feature is activated by pressing the Up button for 3-5 seconds, and the CPC logo

will be displayed on the digital display. The CPC feature can be terminated by pressing the

Up button for 3-5 seconds, or the feature will self terminate after 6 hrs.

1. The (CPC) Feature may be used to Pre-Chill the Cellar prior to loading it with Warm

Product. The feature will shift the Set Point down to a lower setting of 52°F, for the next 6

hours. After the 6 hour time period, the Set Point will automatically return to the original

Set Point.

2. The CPC feature can be conveniently adjusted to the customer’s specic needs, by

accessing the “Customer Preference Select Mode” (CPSM). See Customer Preference

Select Mode Instructions.

Display

Set Point

ON / OFF

Low Temp

High Temp / Pre-Chill

TEMPERATURE

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

No comments

WhisperKool 4000i Specifications Page 38